Waterproof Soft White Lattice Bars
Waterproof Soft White 2835, 20 LED Lattice Bars, 8 LEDs/bar, 16mm wide bar, 100 mm between bars
These waterproof lattice bars can be used for indoor or outdoor installations.
They provide high brightness light for any surface using an array of LEDs. Easy to dim or control using any of our LED dimming drivers, controllers or pulse dimmers. Use a DMX controller in conjunction with our DMX decoders for ultimate control over your lighting.
- Aluminum waterproof material protecting each bar with plastic mounting clips on each end of the bar.
- Soft White (3000° Kelvin.)
- Beam angle is 160 (degrees), with the narrow beam running along the wires.
- CRI = 75+.
- IP65 waterproof.
- 12 volts DC.
- 60 watts/lattice.
- Length of each lattice: 6 feet.
- Number of bars per lattice: 20.
- Number of LEDs per bar: 8.
- Length of each bar: 19.7 in = 500 mm.
- Width of each bar: 0.63 in = 16 mm.
- Height of each bar: 0.35 in = 9 mm.
- LED spacing: 2.46 in = 62.5 mm.
- Spacing between bars (center to center): 100mm.
- Cuttable between bars.
- IP65, RoHS.
- 50,000 hours expected lifetime.
- Warranty: 3 years limited.
- No Ultra-Violet emissions, so it won't harm your art or documents.
- We use high quality LEDs for maximum color vibrancy, longevity and color rendering. We pay more for our LED components, and you'll benefit from the difference. This is not a commodity product. Quality matters, and the materials, controls, connections and tech support we provide will make your project successful.
- Cut LED modules are not returnable.
- We provide detailed installation instructions, design criteria and technical support upon request.
- Each lattice bar set has wires at each of the four corners and wiring is as simple as supplying power to one corner. Voltage drop is negligible and not visible when supplying power to just one corner.